Power down the system completely, discharge any power from it and disconnect all power and video cables. let it sit for 15-30 minutes and try again. A cmos clear (with jumpers, not via the in-bios defaults) may also rectify the issue. So we tried letting the system sit, with all cords unplugged, for almost a day.
I checked on the device manager that did not show 'Intel HD Graphics 4600' under the display option. From my first thought it was a video card faulty so i did removed from the motherboard. I've tested out on my computer if integrated graphics is on device manager so that was showed up in there then i plugged again using the card on the
On the Windows sign in screen, press and hold down the Shift key, then click Restart. Don't let go of the Shift key until you see "Choose an option". 2. Select Troubleshoot > Advanced Options > System Restore. 3. Click Next. 4. Select a restore point dated prior to the problem, then hit Next.
This is normal. 4. Shut off the power, and if you have that kind of PSU, hit the 0 switch circuit breaker on it so you don't accidentally power up. 5. Install the GPU gfx card again in your PCI Express slot, insert any power connectors, flip the 0 so it becomes a I-symbol on the PSU if you have a switch there, and boot. Next, type ‘devmgmt.msc’ and press Enter to open up Device Manager. Running the Device Manager; Once you’re inside Device Manager, scroll down through the list of installed devices and expand the drop-down menu associated with Display Drivers. Inside the Display Adapters menu, right-click on the entry associated with your AMD GPU and

Some anti-virus or endpoint protection software are blocking the creation of network adapters. If you see the "DisplayLink Network Adapter NCM" in Device Manager but you don't see any DisplayLink network adapter in your network adapter list, then you are most likely in this case. Simply reinstall DisplayLink software making sure you don't have

4H6N. 352 26 319 168 183 294 185 82 158

vga not detected in device manager